Our HIGH GRADE NITRILE RUBBER SHEETING 70º SHOREe is an excellent all-purpose material that provides outstanding resistance and physical properties for use in a wide variety of applications.
Our HIGH GRADE NITRILE RUBBER SHEETING 70º SHORE is an excellent all-purpose material that provides outstanding resistance and physical properties for use in a wide variety of applications. Nitrile provides superior material stability, which enables it to retain it’s mechanical properties while in direct contact with oil and grease. This results in a material that is highly durable, even in the most extreme environments. We supply this material in a wide variety of thicknesses from 0.5mm to 40mm. We can also produce it in a rage of formats such as; full rolls, strip cut lengths as well as bespoke gaskets.
Nitrile is one of the most popular elastomers for use in industrial applications. This is largely due to the combination of weathering, fuel, oil, grease and chemical resistance that the material offers. We regularly supply our high grade nitrile material for use in automotive, construction and manufacturing industries. Common uses include; protective barriers and pads, fuel resistant seals, gaskets, strips and O-rings.
Application: | A variety of fuel, oil, grease, solvent & dilute acid applications |
Product: | High Grade Nitrile Sheeting |
Hardness (Shore A): | 70° |
Material: | Nitrile |
Colour: | Black |
Application: | A variety of fuel, oil, grease, solvent & dilute acid applications |
Product: | High Grade Nitrile Sheeting |
Hardness (Shore A): | 70° |
Material: | Nitrile |
Colour: | Black |
STANDARD ROLL SIZES | TOLERANCE | PROPERTIES | VALUES |
---|---|---|---|
0.5mm x 1.4m x 10m | +/‐ 0.2mm | Compound | NBR |
1mm x 1.4m x 10m | +/‐ 0.2mm | Density [Specific Gravity] | 1.30 g/cm2 |
1.5mm x 1.4m x 10m | +/‐ 0.3mm | Tensile Strength | 13 N/mm2 |
3mm x 1.4m x 10m | +/‐ 0.3mm | Elongation at Break | 300% |
4mm x 1.4m x 10m | +/‐ 0.4mm | Minimum Temperature | -40°C |
5mm x 1.4m x 10m | +/‐ 0.4mm | Maximum Temperature | +130°C |
6mm x 1.4m x 10m | +/‐ 0.5mm | Tear Strength | 20 |
8mm x 1.4m x 5m | +/‐ 0.7mm | Compression Set (70°C for 22 hours) | 40% |
10mm x 1.4m x 5m | +/‐ 1mm | ||
15mm x 1.4m x 5m | +/‐ 1mm | ||
20mm x 1.4m x 5m | +/‐ 1.4mm | ||
25mm x 1.4m x 5m | +/‐ 1.75mm | ||
32mm x 1m x 1m | - | ||
38mm x 1m x 1m | - | ||
40mm x 1m x 1m | - |